GYSPOT 26.02
-
Ideal for dent removal and straightening of steel bodywork components
• Welding of stars or rings for sheet-pulling operations.
• Corrugated wire welding, ideal for straightening rounded profiles (e.g. wheel arches).
• Shrinking, for light impacts and finishing work.
• 2600A power.
• Single-phase power supply 230V - 16A.
GYSPOT 27.02
-
Ideal for dent removal and straightening of steel bodywork components
• Welding of stars or rings for sheet-pulling operations.
• Corrugated wire welding for straightening rounded profiles (e.g. wheel arches).
• Shrinking for light impacts and finishing work with graphite pencil.
• 2600A power.
• Single-phase power supply 230V - 16A.
Allsweld MicroSpot
-
A high-efficiency, easy-to-use dent pulling system
Adjustable weld current leaves only a “Micro Spot” area with NO risk of E-coat burn through, eliminating the risk for rust
A single phase 110V or 220V high-efficiency, continuous welder that leaves a limited heat-affect area
Very easy-to-use with adjustable welding currents
Long and lightweight cables make for easy work
Trolley is included
Arc Pull 350
-
The GYSPOT ARCPULL 350 is an arc-draw station specially developed for bodywork. It can weld steel and aluminium studs up to 8 mm in diameter. It is suitable for dent removal from sheet metal, with the installation of pull rings and rivet extraction rods. Its intuitive interface, polarity detection, synergies, motorised gun and single-phase 230 V AC operation make it easy to weld attachments.
- Its digital interface allows you to navigate between two welding modes intuitively and functionally:
- Synergy mode with pre-set settings for quick and easy use.
- The manual mode, for experienced users, provides customised settings for specific applications.
- The drawn arc offers a number of advantages over capacitive discharge
- Its gun incorporates a linear motor that is unique on the market.
GYSPOT 39.02
-
230V, 3800A steel dent remover ideal for all steel straightening and dent removal work. Easy to use thanks to its self-priming gun and intuitive control panel.
Only 2 parameters to select:
• power level (from 11 levels)
• the tool used (from 7 tools)
=> No need to set time and intensity.
Automatic priming system
The welding point is generated automatically by simple contact between the tool and the part to be straightened.
GYSPOT Combi 230 E.PRO
-
A new-generation 2-in-1 dent remover, the Gyspot Combi 230 E Pro can remove dents from all steel and aluminum bodies without dismantling or stripping. Its ergonomic gun for steel and special gun for aluminum make it time-saving and profitable.
- Only 2 parameters to select
- Manual priming system
- Microprocessor control with digital display
- High-power capacitive discharge technology (66 mF)
GYSPOT PRO 230
-
This 230 V, steel dent puller boasts an output current of 3,800 A making it ideal for all steel straightening
and dent-pulling applications. Its two guns (one automatic and one featuring trigger control) as well as its
user-friendly control panel automatic make this device versatile and efficient to use.
GYSPOT Expert 200
-
Dedicated to the bodybuilder's various dent removal and straightening operations, the GYSPOT EXPERT 200 is a top-of-the-range device with a power rating of up to 5,100 A. Independent adjustment of welding current and time enables precise control of the impact of the weld on zinc-coated sheet metal, particularly thin sheet metal.
The GYSPOT EXPERT is designed for a 200-240 V, 30 A delayed fuse power supply and offers two operating modes:
- A MANUAL operating mode allowing the welding current and time to be adjusted independently to suit the bodybuilder's exact requirements.
- A SYNERGIC mode recommending settings based on GYS expertise.
For ease of use, it also offers two ignition systems:
- automatic priming: by simple contact between the tool and the part to be straightened.
- manual priming: by pressing a trigger when the tool is in contact with the workpiece.
GYSPOT ARCPULL 200
-
The GYSPOT ARCPULL 200 is a drawn-arc station developed specifically for thin sheet metal used in car bodywork. Its innovative gun is equipped with a high-precision, digitally-controlled linear motor for fine-tuning synergies.
- Its digital interface allows you to navigate between two welding modes in an intuitive and functional way:
- Synergy mode with pre-set settings for quick and easy use.
- The manual mode, for experienced users, provides customized settings for specific uses.
- For aluminum dent removal, the drawn arc offers a number of advantages over capacitive discharge.
- Its gun incorporates a linear motor that is unique on the market.
Trolley Dent 600
Trolley Dent 1000
TROLLEY UNIVERSAL 800
TROLLEY 4m³ WELD 810
TROLLEY DENT 1600
DENTSTATION PRO WD
Glue Dent Pulling System
-
Uses plastic tabs with hot glue to straighten dented areas without damaging the finished surface
Dissembling panel fixtures is no longer necessary, thanks to the well-designed tabs and hot glue gun
Includes cart, aluminum hammers, double action pull bar and more
Master Aluminum Repair Center
-
Repair Centers must have a separate tool cart/trolley with the following tools that are dedicated to aluminum cosmetic repairs
The tool trolley must be clearly labeled as the storage for the aluminum tools
ALL tools must be present in the aluminum trolley
Equipped with the required tools to satisfy the Ford and Mercedes-Benz Certified Collision Program Standards
Features the necessary storage and peg board construction to store all the tools required for the program
Steel Spot Dent Puller
-
The Steel Spot Dent Puller is a multi-function system designed for steel dent repair in collision repair shops.
The main control and digital display are simple and easy to use with 5 pre-set programs. Once selected, these programs allow a further adjustment of +/-9% in value.
The Steel Spot is supplied together with a welding gun and 2000mm (6.5 ft) long ground cable .
This Steel Dent Puller is the best combination of versatility and professional quality, where the user can adapt the welder to each type of repair.
CMO Porta Power
-
ECTRO POWER
Battery-operated pulling and pushing system with a capacity of up to 5 tons, designed for quick repairs. It operates efficiently in narrow spaces without the need for electric cables or hydraulic hoses.
Fast-Pull 550
-
The Solidus Fast-Pull 550 is designed to reach a pulling traction force up 1212.5 lbs. It is counter balanced by the pulling of a metal plate anchored to the floor through pneumatic depression. The adjustable pulling force positions allow for a wide range of usage, from high roof pillars to low door sills. The belt driven manual hoist provides a progressive and precise repair using spot welding or glue pulling applications. Light-weight and very mobile.
Airfix Draw Aligner
-
The AIRFIX DRAW ALIGNER is the panel beater's essential ally for dent removal work. Patented, it has a non-glued, recessed seal that's easy to change in just a few moments. What's more, 4 pads in the air gap prevent the seal from shearing, making it even more durable. It is without doubt the most reliable column on the market.
- Pulling capacity up to 350 kg over the entire height.
- Maximum height of 1.30 m.
- Crank winch with Ø6 mm rope (tensile strength 1.5 tons).
- Lightweight (31 kg) and easy to move thanks to its 2 wheels.
GYS DRAW ALIGNER
-
An essential addition to any dent removal machine.
Thanks to its powerful hydraulic cylinder, the pulling bracket is ideal for effortlessly straightening large dents.
• Lightweight and quick to dismantle
• Easy straightening of body panels (2 lower body support pads)
• Height-adjustable pulling position
• Supplied complete with: bracket, double skids, 6-tooth claw, chain and hydraulic pump.